Under Rule G-17 of the Municipal Securities Rulemaking Board (MSRB), brokers, dealers, and municipal securities dealers (“dealers”) must, in the conduct of their municipal securities activities, deal fairly with all persons and must not engage in any deceptive, dishonest, or unfair practice. This rule is most often cited in connection with duties owed by dealers to investors; however, it also applies to their interactions with other market participants, including municipal entities[1] such as states and their political subdivisions that are issuers of municipal securities (“issuers”).

The MSRB has previously observed that Rule G-17 requires dealers to deal fairly with issuers.[2] With the passage of the Dodd-Frank Wall Street Reform and Consumer Protection Act,[3] the MSRB was expressly directed by Congress to protect municipal entities. Accordingly, in 2012, the MSRB provided additional interpretive guidance that addressed how Rule G-17 applies to dealers acting in the capacity of underwriters in the municipal securities transactions described therein (the “2012 Interpretive Notice”).[4]

This notice supersedes the MSRB’s 2012 Interpretive Notice, dated August 2, 2012, concerning the application of Rule G-17 to underwriters of municipal securities, as well as the related implementation guidance, dated July 18, 2012, and frequently-asked questions, dated March 25, 2013 (the “prior guidance”).[5] The prior guidance will remain applicable to underwriting relationships commencing prior to March 31, 2021. Underwriters will be subject to the amended guidance provided by this notice for all of their underwriting relationships beginning on or after that date. For purposes of this notice, an underwriting relationship is considered to have begun at the time the delivery of the first disclosure is triggered as described under “Timing and Manner of Disclosures” below (i.e., the earliest stages of an underwriter’s relationship with an issuer with respect to an issue, such as in a response to a request for proposal or in promotional materials provided to an issuer).

Applicability of the Notice

Except where a competitive underwriting is specifically mentioned, this notice applies to negotiated underwritings only.[6] This notice does not apply to a dealer acting as a primary distributor in a continuous offering of municipal fund securities, such as interests in 529 savings plans and Achieving a Better Life Experience (ABLE) programs. It does not apply to selling group members. This notice does not address a dealer’s duties when the dealer is serving as an advisor to a municipal entity. This notice applies to a primary offering of a new issue of municipal securities that is placed with investors by a dealer serving as placement agent, although certain disclosures may be omitted as described below.

The fair practice duties outlined in this notice are those duties that a dealer owes to a municipal entity when the dealer underwrites a new issue of municipal securities. This notice does not set out the underwriter’s fair-practice duties to other parties to a municipal securities financing (e.g., conduit borrowers). The MSRB notes, however, that Rule G-17 does require that an underwriter deal fairly with all persons in the course of the dealer’s municipal securities activities. What actions are considered fair will, of necessity, be dependent on the nature of the relationship between a dealer and such other parties, the particular actions undertaken, and all other relevant facts and circumstances. Although this notice does not address what an underwriter’s fair-dealing duties may be with respect to other parties, it may serve as one of many bases for an underwriter to consider how to establish appropriate policies and procedures for ensuring that it meets such fair-practice obligations, in light of its relationship with such other participants and their particular roles.

The examples discussed in this notice are illustrative only and are not meant to encompass all obligations of dealers to municipal entities under Rule G-17. Furthermore, when municipal entities are customers[7] of dealers, they are subject to the same protections under MSRB rules, including Rule G‑17, that apply to other customers.[8] The MSRB notes that an underwriter has a duty of fair dealing to investors in addition to its duty of fair dealing to issuers. An underwriter also has a duty to comply with other MSRB rules as well as other federal and state securities laws.

Basic Fair Dealing Principle

As noted above, Rule G-17 precludes a dealer, in the conduct of its municipal securities activities, from engaging in any deceptive, dishonest, or unfair practice with any person, including an issuer. The rule contains an anti-fraud prohibition. Thus, an underwriter must not misrepresent or omit the facts, risks, potential benefits, or other material information about municipal securities activities undertaken with a municipal issuer. However, Rule G-17 does not merely prohibit deceptive conduct on the part of the dealer; it also establishes a general duty of a dealer to deal fairly with all persons (including, but not limited to, issuers), even in the absence of fraud.

Role of Underwriters and Conflicts of Interest

In negotiated underwritings, underwriters’ Rule G-17 duty to deal fairly with an issuer requires certain disclosures to the issuer in connection with an issue or proposed issue of municipal securities, as provided below.[9]

• The disclosures discussed under “Disclosures Concerning the Underwriters’ Role” and “Disclosures Concerning Underwriters’ Compensation” (the “standard disclosures”) must be provided by the sole underwriter or the syndicate manager[10] to the issuer as described below.
• The disclosures discussed under “Required Disclosures to Issuers” (the “transaction-specific disclosures”) must be provided to the issuer by the underwriter who has recommended a financing structure or product to the issuer as described below.[11]
• The disclosures discussed under “Other Conflicts Disclosures” (the “dealer-specific disclosures”) must be provided by the sole underwriter or each underwriter in a syndicate (as applicable) as described below.[12]

Disclosures Concerning the Underwriter’s Role.  The sole underwriter or the syndicate manager[13] must disclose to the issuer that:

Underwriters also must not recommend that issuers not retain a municipal advisor. Accordingly, underwriters may not discourage issuers from using a municipal advisor or otherwise imply that the hiring of a municipal advisor would be redundant because the sole underwriter or underwriting syndicate can provide the services that a municipal advisor would.

Disclosure Concerning the Underwriters’ Compensation. The sole underwriter or syndicate manager must disclose to issuers whether underwriting compensation will be contingent on the closing of a transaction. Sole underwriters or syndicate managers must also disclose that compensation that is contingent on the closing of a transaction or the size of a transaction presents a conflict of interest, because it may cause underwriters to recommend a transaction that is unnecessary or to recommend that the size of a transaction be larger than is necessary.

Other Conflicts Disclosures. The sole underwriter or each underwriter in a syndicate must also, when and if applicable, disclose other dealer-specific actual material conflicts of interest and potential material conflicts of interest,[17] including, but not limited to, the following:

These categories of conflicts of interest are not mutually exclusive and, in some cases, a specific conflict may reasonably be viewed as falling into two or even more categories. An underwriter making disclosures of dealer-specific conflicts of interest to an issuer should concentrate on making them in a complete and understandable manner and need not necessarily organize them according to the categories listed above, particularly if adhering to a strict categorization process might interfere with the clarity and conciseness of disclosures.

Where there is a syndicate, each underwriter in the syndicate has a duty to provide its dealer-specific disclosures to the issuer. In general, dealer-specific disclosures for one dealer cannot be satisfied by disclosures made by another dealer (e.g., the syndicate manager) because such disclosures are, by their nature, not uniform, and must be prepared by each dealer. However, a syndicate manager may deliver each of the dealer-specific disclosures to the issuer as part of a single package of disclosures, as long as it is clear to which dealer each disclosure is attributed. An underwriter in the syndicate is not required to notify an issuer if it has determined that it does not have any dealer-specific disclosures to make. However, the obligation to provide dealer-specific disclosures includes material conflicts of interest arising after the time of engagement with the issuer, as noted below.

Timing and Manner of Disclosures.  The standard disclosures, transaction-specific disclosures, and dealer-specific disclosures must be made in writing to an official of the issuer identified by the issuer as a primary contact for that issuer for the receipt of the foregoing disclosures. In the absence of such identification, an underwriter may make such disclosures in writing to an official of the issuer that the underwriter reasonably believes has the authority to bind the issuer by contract with the underwriter and that, to the knowledge of the underwriter, is not a party to a disclosed conflict.[20] If provided within the same document as the dealer-specific disclosures and/or transaction-specific disclosures, the standard disclosures must be identified clearly as such and provided apart from the other disclosures (e.g., in an appendix).

Disclosures must be made in a clear and concise manner designed to make clear to such official the subject matter of such disclosures and their implications for the issuer in accordance with the following timelines.

• A sole underwriter or syndicate manager must make the standard disclosure concerning the arm’s-length nature of the underwriter-issuer relationship at the earliest stages of the underwriter’s relationship with the issuer with respect to an issue (e.g., in a response to a request for proposals or in promotional materials provided to an issuer).[21]

• A sole underwriter or syndicate manager must make the other standard disclosures regarding the underwriter’s role and compensation at or before the time the underwriter is engaged to perform underwriting services (e.g., in an engagement letter), not solely in a bond purchase agreement.

• An underwriter must make the dealer-specific disclosures at or before the time the underwriter has been engaged to perform the underwriting services.[22] Thereafter, an underwriter must make any applicable dealer-specific disclosures discovered or arising after being engaged as an underwriter as soon as practicable after being discovered and with sufficient time for the issuer to fully evaluate any such conflict and its implications.[23]

• An underwriter who recommends a financing structure or product to an issuer must make the transaction-specific disclosures in sufficient time before the execution of a commitment by an issuer (which may include a bond purchase agreement) relating to the financing, and with sufficient time to allow the issuer to fully evaluate the features of the financing.

Unless directed otherwise by an issuer, an underwriter may update selected portions of disclosures previously provided so long as such updates clearly identify the additions or deletions and are capable of being read independently of the prior disclosures.[24]

Acknowledgement of Disclosures. When delivering a disclosure, the underwriter must attempt to receive written acknowledgement[25] from an official of the issuer identified by the issuer as a primary contact for the issuer’s receipt of the foregoing disclosures.[26] In the absence of such identification, an underwriter may seek acknowledgement from an official of the issuer whom the underwriter reasonably believes has the authority to bind the issuer by contract with the underwriter and that, to the knowledge of the underwriter, is not party to a disclosed conflict. This notice does not specify the particular form of acknowledgement, but may include, for example, an e-mail read receipt.[27] An underwriter may proceed with a receipt of a written acknowledgement that includes an issuer’s reservation of rights or other self-protective language. If the official of the issuer agrees to proceed with the underwriting engagement after receipt of the disclosures but will not provide written acknowledgement of receipt, the underwriter responsible for making the requisite disclosure may proceed with the engagement after documenting with specificity why it was unable to obtain such written acknowledgement. Additionally, an underwriter must be able to produce evidence (including, for example, by automatic e-mail delivery receipt) that the disclosures were delivered with sufficient time for evaluation by the issuer before proceeding with the transaction. An issuer’s written acknowledgement of the receipt of disclosure is not dispositive of whether such disclosures were made with an appropriate amount of time. The analysis of whether disclosures were provided with sufficient time for an issuer’s review is based on the totality of the facts and circumstances.

Representations to Issuers

All representations made by underwriters to issuers in connection with municipal securities underwritings, whether written or oral, must be truthful and accurate and must not misrepresent or omit material facts. Underwriters must have a reasonable basis for the representations and other material information contained in documents they prepare and must refrain from including representations or other information they know or should know is inaccurate or misleading. For example, in connection with a certificate signed by the underwriter that will be relied upon by the issuer or other relevant parties to an underwriting (e.g., an issue price certificate), the dealer must have a reasonable basis for the representations and other material information contained therein.[28] In addition, an underwriter’s response to an issuer’s request for proposals or qualifications must fairly and accurately describe the underwriter’s capacity, resources, and knowledge to perform the proposed underwriting as of the time the proposal is submitted and must not contain any representations or other material information about such capacity, resources, or knowledge that the underwriter knows or should know to be inaccurate or misleading.[29] Matters not within the personal knowledge of those preparing the response (e.g., pending litigation) must be confirmed by those with knowledge of the subject matter. An underwriter must not represent that it has the requisite knowledge or expertise with respect to a particular financing if the personnel that it intends to work on the financing do not have the requisite knowledge or expertise.

Required Disclosures to Issuers

Many municipal securities are issued using financing structures that are routine and well understood by the typical municipal market professional, including most issuer personnel that have the lead responsibilities in connection with the issuance of municipal securities. For example, absent unusual circumstances or features, the typical fixed rate offering may be presumed to be well understood. Nevertheless, in the case of issuer personnel that the underwriter reasonably believes lack the requisite knowledge or experience to fully understand or assess the implications of a financing structures or products recommended by an underwriter, the underwriter making such recommendation must provide disclosures on the material aspects of such financing structures or product that it recommends (i.e., the “transaction-specific disclosures”).[30]

In some cases, issuer personnel responsible for the issuance of municipal securities would not be well positioned to fully understand or assess the implications of a recommended financing structure in its totality, because it is structured in a unique, atypical, or otherwise complex manner or incorporates unique, atypical, or otherwise complex features or products (a “complex municipal securities financing”).[31] Examples of complex municipal securities financings include, but are not limited to, variable rate demand obligations (“VRDOs”), financings involving derivatives (such as swaps), and financings in which interest rates are benchmarked to an index (such as LIBOR, SIFMA, or SOFR).[32] When a recommendation regarding a complex municipal securities financing structure has been made by an underwriter in a negotiated offering,[33] the underwriter making the recommendation has an obligation under Rule G-17 to communicate more particularized transaction-specific disclosures than those that may be required in the case of the recommendation of routine financing structures or products.[34] The underwriter making the recommendation must also disclose the material financial characteristics of the complex municipal securities financing, as well as the material financial risks of the financing that are known to the underwriter and reasonably foreseeable at the time of the disclosure.[35] It must also disclose any incentives for the recommendation of the complex municipal securities financing and other associated material conflicts of interest.[36] Such disclosures must be made in a fair and balanced manner based on principles of fair dealing and good faith.

The level of transaction-specific disclosure required may vary according to the issuer’s knowledge or experience with the proposed financing structure or similar structures, capability of evaluating the risks of the recommended financing structure or product, and financial ability to bear the risks of the recommended financing structure or product, in each case based on the reasonable belief of the underwriter.[37] Consequently, the level of transaction-specific disclosure to be provided to a particular issuer also can vary over time. In all events, the underwriter must disclose any incentives for the recommendation of the complex municipal securities financing and other associated conflicts of interest.

As previously mentioned, the transaction-specific disclosures must be made in writing to an official of the issuer identified by the issuer as a primary contact for the issuer for the receipt of such disclosures, or, in the absence of such identification, an underwriter may make such disclosures in writing to an issuer official whom the underwriter reasonably believes has the authority to bind the issuer by contract with the underwriter(s), and that, to the knowledge of the underwriter delivering the disclosure, is not a party to a disclosed conflict: (i) in sufficient time before the execution of a contract with the underwriter to allow the official to evaluate the recommendation (including consultation with any of its counsel or advisors) and (ii) in a manner designed to make clear to such official the subject matter of such disclosures and their implications for the issuer.

The disclosures concerning a complex municipal securities financing must address the specific elements of, and/or relevant products incorporated, into the recommended financing structure, rather than being general in nature.[38] An underwriter making a Complex Municipal Securities Financing Recommendation to an issuer cannot satisfy its fair dealing obligations by providing an issuer a single document setting out general descriptions of the various financing structures and/or products that may be recommended from time to time to various issuer clients that would effectively require issuer personnel to discover which disclosures apply to a particular recommendation and to the particular circumstances of that issuer. Underwriters can create, in anticipation of making such a recommendation, individualized descriptions, with appropriate levels of detail, of the material financial characteristics and risks for each of the various complex municipal securities financing structures and/or products (including any typical variations) they may recommend from time to time to various issuer clients, with such standardized descriptions serving as the base for more particularized disclosures for the specific complex financing the underwriter recommends to particular issuers.[39] In making a recommendation, an underwriter could incorporate, to the extent applicable, any refinements to the base description needed to fully describe the material financial features and risks unique to that financing.[40]

If the underwriter who has made a recommendation does not reasonably believe that the official to whom the disclosures are addressed is capable of independently evaluating the disclosures, the underwriter must make additional efforts reasonably designed to inform the official or its employees or agent. The underwriter also must make an independent assessment that such disclosures are appropriately tailored to the issuer’s level of sophistication.

Underwriter Duties in Connection with Issuer Disclosure Documents

Underwriters often play an important role in assisting issuers in the preparation of disclosure documents, such as preliminary official statements and official statements.[41] These documents are critical to the municipal securities transaction, because investors rely on the representations contained in such documents in making their investment decisions. Moreover, investment professionals, such as municipal securities analysts and ratings services, rely on the representations in forming an opinion regarding the credit. A dealer’s duty to have a reasonable basis for the representations it makes, and other material information it provides, to an issuer and to ensure that such representations and information are accurate and not misleading, as described above, extends to representations and information provided by the underwriter in connection with the preparation by the issuer of its disclosure documents (e.g., cash flows).

Underwriter Compensation and New Issue Pricing

Excessive Compensation. An underwriter’s compensation for a new issue (including both direct compensation paid by the issuer and other separate payments, values, or credits received by the underwriter from the issuer or any other party in connection with the underwriting), in certain cases and depending upon the specific facts and circumstances of the offering, may be so disproportionate to the nature of the underwriting and related services performed as to constitute an unfair practice with regard to the issuer that it is a violation of Rule G-17. Among the factors relevant to whether an underwriter’s compensation is disproportionate to the nature of the underwriting and related services performed, are the credit quality of the issue, the size of the issue, market conditions, the length of time spent structuring the issue, and whether the underwriter is paying the fee of the underwriter’s counsel or any other relevant costs related to the financing.

Fair Pricing. The duty of fair dealing under Rule G-17 includes an implied representation that the price an underwriter pays to an issuer is fair and reasonable, taking into consideration all relevant factors, including the best judgment of the underwriter as to the fair market value of the issue at the time it is priced.[42] In general, a dealer purchasing bonds in a competitive underwriting for which the issuer may reject any and all bids will be deemed to have satisfied its duty of fairness to the issuer with respect to the purchase price of the issue as long as the dealer’s bid is a bona fide bid (as defined in MSRB Rule G‑13)[43] that is based on the dealer’s best judgment of the fair market value of the securities that are the subject of the bid. In a negotiated underwriting, the underwriter has a duty under Rule G-17 to negotiate in good faith with the issuer. This duty includes the obligation of the dealer to ensure the accuracy of representations made during the course of such negotiations, including representations regarding the price negotiated and the nature of investor demand for the securities (e.g., the status of the order period and the order book). If, for example, the dealer represents to the issuer that it is providing the “best” market price available on the new issue, or that it will exert its best efforts to obtain the “most favorable” pricing, the dealer may violate Rule G-17 if its actions are inconsistent with such representations.[44]

Conflicts of Interest

Payments to or from Third Parties. In certain cases, compensation received by an underwriter from third parties, such as the providers of derivatives and investments (including affiliates of an underwriter), may color the underwriter’s judgment and cause it to recommend products, structures, and pricing levels to an issuer when it would not have done so absent such payments. The MSRB views the failure of an underwriter to disclose to the issuer the existence of payments, values, or credits received by an underwriter in connection with its underwriting of the new issue from parties other than the issuer, and payments made by the underwriter in connection with such new issue to parties other than the issuer (in either case including payments, values, or credits that relate directly or indirectly to collateral transactions integrally related to the issue being underwritten), to be a violation of an underwriter’s obligation to the issuer under Rule G-17.[45] For example, it would be a violation of Rule G-17 for an underwriter to compensate an undisclosed third party in order to secure municipal securities business. Similarly, it would be a violation of Rule G-17 for an underwriter to receive undisclosed compensation from a third party in exchange for recommending that third party’s services or product to an issuer, including business related to municipal securities derivative transactions. This notice does not require that the amount of such third-party payments be disclosed. The underwriter must also disclose to the issuer whether it has entered into any third-party arrangements for the marketing of the issuer’s securities.

Profit-Sharing with Investors. Arrangements between the underwriter and an investor purchasing new issue securities from the underwriter (including purchases that are contingent upon the delivery by the issuer to the underwriter of the securities) according to which profits realized from the resale by such investor of the securities are directly or indirectly split or otherwise shared with the underwriter also would, depending on the facts and circumstances (including in particular if such resale occurs reasonably close in time to the original sale by the underwriter to the investor), constitute a violation of the underwriter’s fair dealing obligation under Rule G-17.[46] Such arrangements could also constitute a violation of Rule G‑25(c), which precludes a dealer from sharing, directly or indirectly, in the profits or losses of a transaction in municipal securities with or for a customer. An underwriter should carefully consider whether any such arrangement, regardless of whether it constitutes a violation of Rule G-25(c), may evidence a potential failure of the underwriter’s duty with regard to new issue pricing described above.

Credit Default Swaps. The issuance or purchase by a dealer of credit default swaps for which the reference is the issuer for which the dealer is serving as underwriter, or an obligation of that issuer, may pose a conflict of interest, including a dealer-specific conflict of interest, because trading in such municipal credit default swaps has the potential to affect the pricing of the underlying reference obligations, as well as the pricing of other obligations brought to market by that issuer. Rule G-17 requires, therefore, that a dealer disclose the fact that it engages in such activities to the issuers for which it serves as underwriter. Activities with regard to credit default swaps based on baskets or indexes of municipal issuers that include the issuer or its obligation(s) need not be disclosed, unless the issuer or its obligation(s) represents more than 2% of the total notional amount of the credit default swap or the underwriter otherwise caused the issuer or its obligation(s) to be included in the basket or index.

Retail Order Periods

Rule G-17 requires an underwriter that has agreed to underwrite a transaction with a retail order period to, in fact, honor such agreement.[47]A dealer that wishes to allocate securities in a manner that is inconsistent with an issuer’s requirements must not do so without the issuer’s consent. In addition, Rule G-17 requires an underwriter that has agreed to underwrite a transaction with a retail order period to take reasonable measures to ensure that retail clients are bona fide. An underwriter that knowingly accepts an order that has been framed as a retail order when it is not (e.g., a number of small orders placed by an institutional investor that would otherwise not qualify as a retail customer) would violate Rule G-17 if its actions are inconsistent with the issuer’s expectations regarding retail orders. In addition, a dealer that places an order that is framed as a qualifying retail order but in fact represents an order that does not meet the qualification requirements to be treated as a retail order (e.g., an order by a retail dealer without “going away” orders[48] from retail customers, when such orders are not within the issuer’s definition of “retail”) violates its Rule G-17 duty of fair dealing. The MSRB will continue to review activities relating to retail order periods to ensure that they are conducted in a fair and orderly manner consistent with the intent of the issuer and the MSRB’s investor protection mandate.

Dealer Payments to Issuer Personnel

Dealers are reminded of the application of MSRB Rule G-20, on gifts, gratuities, and non-cash compensation, and Rule G-17, in connection with certain payments made to, and expenses reimbursed for, issuer personnel during the municipal bond issuance process.[49]  These rules are designed to avoid conflicts of interest and to promote fair practices in the municipal securities market.

Dealers should consider carefully whether payments they make in regard to expenses of issuer personnel in the course of the bond issuance process, including in particular, but not limited to, payments for which dealers seek reimbursement from bond proceeds or issuers, comport with the requirements of Rule G‑20. For example, a dealer acting as a financial advisor or underwriter may violate Rule G-20 by paying for excessive or lavish travel, meal, lodging and entertainment expenses in connection with an offering (such as may be incurred for rating agency trips, bond closing dinners, and other functions) that inure to the personal benefit of issuer personnel and that exceed the limits or otherwise violate the requirements of the rule.[50] 

Rule G-34 requires underwriters and dealers participating in the placement of a new issue of municipal securities to ensure that an application is made for CUSIP numbers for the new issue.[1] The CUSIP Service Bureau assigns CUSIP numbers to reflect the differences in securities that are relevant to trading and investment decisions.[2] In addition, Board rules G-12 and G-15 require that CUSIP numbers appear on confirmations of transactions and that the securities delivered on those transactions match the CUSIP numbers appearing on the confirmations.[3]

Recently, certain questions have arisen about the proper method for assignment of CUSIP numbers to certain general obligation securities that have been issued in multiple series. In these issues, the issuer uses the proceeds from each series to fund a separate project, but the project itself offers bondholders no additional security for payment beyond that provided by the full faith and credit of the issuer. Securities within multiple series may be identical with respect to dated date, maturity, security and source of payment. However, an individual series may be called, in whole or part, at the option of the issuer, based on the series designation. In addition, the securities are subject to certain mandatory redemption features, which are exercisable by series and which are dependent upon the status of the project funded by the series.

Underwriters have encountered confusion as to whether each series within these issues should be assigned separate CUSIP numbers or whether the CUSIP number assignment for the issues should ignore the series designation. The Board wishes to clarify that, because of the possibility that the securities will be subject to early redemption by series designation, separate CUSIP numbers for each series are required.

The Board previously has indicated that a designation of multiple "purposes" for general obligation debt does not require separate CUSIP numbers for each purpose if the securities otherwise are identical.[4] Accordingly, there are a number of outstanding multi-series general obligation issues which are assigned one CUSIP number for each maturity and which are traded, cleared, and settled without regard to series designation. While the Board does not wish to change this general rule, it believes that separate CUSIP number assignment is required for those multi-series issues which can be called by series. The Board notes that the probability of a partial or "in-whole" redemption of a series has the potential to become a significant factor to investors and that it therefore is necessary to preserve distinctions among the various series when trading, clearing and settling these securities.

The Board has consulted with the CUSIP Service Bureau in this matter and the Service Bureau has agreed to assign separate CUSIP numbers to multi-series general obligation issues which can be called by series. Dealers serving as underwriters for these issues therefore should not request the Service Bureau to ignore the series designation when assigning numbers to these issues.

[1]The rule applies to all issues eligible for CUSIP number assignment. This includes nearly all new issue securities over three months in maturity.

[2] CUSIP numbers are assigned to municipal issues by their issuer title, dated date, interest rate, and maturity date. Municipal securities which are identical as to these four elements are assigned different numbers if there is a further distinction between the securities involving any of the following:

(1) the call features (i.e., whether or not securities are callable, date or terms of call feature, etc.);

(2) any limitation of the pledge on a general obligation bond (e.g., limited tax versus full faith and credit);

(3) any distinction in the secondary security or the source of payment of a revenue bond;

(4) the identity of any entity, besides the issuer, obligated on the debt service of the securities (e.g., two pollution control revenue bonds secured by different corporate obligors); and

(5) any distinction in the secondary security or the source of payment of a general obligation bond.

[3] Certain exceptions to these rules exist for securities which have not been assigned CUSIP numbers and instances in which the CUSIP number on a confirmation and the CUSIP number assigned to securities differ only because of a transposition or transcription error.

[4] See MSRB Reports Vol. 2, No. 1, (January 1982), p. 3. Of course, if specific portions of a general obligation issue are additionally backed by the revenues from various issuer activity or proceeds from various projects (so-called "double-barrelled" issues), separate CUSIP numbers are required to reflect these distinctions.

Calculation of Price and Yield on Continuously Callable Securities. This will respond to your letter of May 30, 1989, relating to the calculation of price and yield in transactions involving municipal securities which can be called by the issuer at any time after the first optional "in-whole" call date. The Board reviewed your letter at its August 1989 meeting and has authorized this response.

Rules G-12(c) and G-15(a) govern inter-dealer and customer confirmations, respectively. For transactions executed on a yield basis, rules G-12(c)(v)(l) and G-15(a)(v)(l)[*] require the dollar price computed from yield and shown on the confirmation to be computed to the lower of call or maturity. The rules also require the call date and price to be shown on the confirmation when securities are priced to a call date.

In computing price to call, only "in-whole" calls, of the type which may be exercised in the event of a refunding, should be used.[1] The "in-whole" call producing the lowest price must be used when computing price to call. If there is a series of "in-whole" call dates with declining premiums, a calculation to the first premium call date generally will produce the lowest price to call. However, in certain circumstances involving premiums which decline steeply over a short time, an "intermediate" call date--a date on which a lower premium or par call becomes operative--may produce the lowest price. Dealers must calculate prices to intermediate call dates when this is the case.[2] Identical rules govern the computation and display of yield to call and yield to maturity, as required on customer confirmations under rule G-15(a).

The issues that you describe are callable at declining premiums, in part or in whole, at any time after the first optional call date. There is no restriction on the issuer in exercising a call after this date except for the requirement to give 30 to 60 days notice of the redemption. Since this "continuous" call provision is an "in-whole" call of the type which may be used for a refunding, it must be considered when calculating price or yield.

The procedure for calculating price to call for these issues is the same as for other securities with declining premium calls. Dealers must take the lowest price possible from the operation of an "in-whole" call feature, compare it to the price calculated to maturity and use the lower of the two figures on the confirmation. For settlement dates prior to the first "in-whole" call, it generally should be sufficient to check the first and intermediate call dates (including the par call), determine which produces the lowest price, and compare that price to the price calculated to maturity. For settlement dates occurring after the first "in-whole" call date, it must be assumed that a notice of call could be published on the day after trade date, which would result in the redemption of the issue 31 days after trade date.[3] The price calculated to this possible redemption date should be compared to prices calculated to subsequent intermediate call dates and the lowest of these prices used as the price to call. The price computed to call then can be compared to the price computed to maturity and the lower of the two included on the confirmation. If a price to call is used, the date and redemption price of the call must be stated. Identical procedures are used for computing yield from price for display on customer confirmations under rule G-15(a).

You also have asked for the Board's interpretation of two official statements which you believe have a continuous call feature and ask whether securities with continuous call features typically are called between the normal coupon dates. The Board's rulemaking authority does not extend to the interpretation of official statements and the Board does not collect information on issuer practices in calling securities. Therefore, the Board cannot assist you with these inquiries. MSRB Interpretation of August 15, 1989.

[1] The parties to a transaction may agree at the time of trade to price securities to a date other than an "in-whole" call date or maturity. If such an agreement is reached, it must be noted on the confirmation.

[2] See [Rule G-15 Interpretation] Notice Concerning Pricing to Call, December 10, 1980, MSRB Manual (CCH) paragraph 3571.

[3] If a notice of call for the entire issue occurs on or prior to the trade date, delivery cannot be made on the transaction and it must be worked out or arbitrated by the parties. See rules G-12(e)(x)(B) and G-15(c)(viii)(B).

[*] [Currently codified at rule G-15(a)(i)(A)(5)(c)]

Confirmation requirements for partially refunded securities. This will respond to your letter of May 16, 1989. The Board reviewed your letter at its August 1989 meeting and authorized this response.

You ask what is the correct method of computing price from yield on certain types of "partially prerefunded" issues having a mandatory sinking fund redemption. The escrow agreement for the issues provides for a stated portion of the issue to be redeemed at a premium price on an optional, "in-whole," call date for the issue. The remainder of the issue is subject to a sinking fund redemption at par.[1] Unlike some issues that are prerefunded by certificate number, the certificates that will be called at a premium price on the optional call date are not identified and published in advance. Instead, they are selected by lottery 30 to 60 days before the redemption date for the premium call. Prior to this time, it is not known which certificates will be called at a premium price on the optional call date. In the particular issues you have described, the operation of the sinking fund redemption will retire the entire issue prior to the stated maturity date for the issue.

As you know, rules G-12(c) and G-15(a) govern inter-dealer and customer confirmations, respectively. Rules G-12(c)(v)(1) and G-15(a)(i)(1)[*] require the dollar price computed from yield and shown on the confirmation to be computed to the lower of call date or maturity. For purposes of computing price to call, only "in-whole" calls, of the type which may be exercised in the event of a refunding, are used.[2] Accordingly, the Board previously has concluded that the sinking fund redemption in the type of issue you have described should be ignored and the dollar price should be calculated to the lowest of the "in-whole" call date for the issue (i.e., the redemption date of the prerefunding) or maturity. In addition, the stated maturity date must be used for the calculation of price to maturity rather than any "effective" maturity which results from the operation of the sinking fund redemption. Identical rules apply when calculating yield from dollar price. Of course, the parties to a transaction may agree to calculate price or yield to a specific date, e.g., a date which takes into account a sinking fund redemption. If this is done, it should be noted on the confirmation.[3]

In our telephone conversations, you also asked what is the appropriate securities description for securities that are advance refunded in this manner. Rules G-12(c)(v)(E) and G-15(a)(i)(E)[†] require that confirmations of securities that are "prerefunded" include a notation of this fact along with the date of "maturity" that has been fixed by the advance refunding and the redemption price. The rules also state that securities that are redeemable prior to maturity must be described as "callable".[4] In addition, rules G-12(c)(vi)(I) and G-15(a)(iii)(J)[‡] state that confirmations must include information not specifically required by the rules if the information is necessary to ensure that the parties agree to the details of the transaction. Since, in this case, only a portion of the issue will be chosen by lot and redeemed at a premium price under the prerefunding, this fact must be noted on the confirmation. As an example, the issue could be described as "partially prerefunded to [redemption date] at [premium price] to be chosen by lot-callable." The notation of this fact must be included within the securities description shown on the front of the confirmation. MSRB Interpretation of August 15, 1989.

[1] In some issues, a sinking fund redemption operates prior to the optional call date, while, in others, the sinking fund redemption does not begin until on or after that date.

[2] See [Rule G-15 Interpretation –] Notice of December 10, 1980, Concerning Pricing to Call, MSRB Manual, paragraph 3571.

[3] These rules on pricing partially prerefunded securities with sinking funds are set forth in [Rule G-15 Interpretive Letter – Disclosure of pricing: calculating the dollar price of partially prerefunded bonds,] MSRB  interpretation of May 15, 1986, MSRB Manual, paragraph 3571.26.

[4] The Board has published an interpretive notice providing specific guidance on the confirmation of advanced refunded securities that are callable pursuant to an optional call. See Application of Rules G-12(c) and G-15(a) on Confirmation Disclosure of Escrowed-to-Maturity Securities [in Rule G-17 Interpretation – Notice of Interpretation on Escrowed-to-Maturity Securities: Rules G-17, G-12 and G-15], MSRB Manual, paragraph 3581.

[*] [Currently codified at rule G-15(a)(i)(A)(5)(c)(i)] 

[†] [Currently codified at rule G-15(a)(i)(C)(3)(a)]

[‡] [Currently codified at rule G-15(a)(i)(A)(8)]

Review and approval of transactions.  This is in response to your letter requesting an interpretation of rule G-27(c)(ii)(B)^[*] which requires that a [designated] principal promptly review and approve, in writing, each transaction in municipal securities. You state that your firm proposes to use a system of exception reports to review the firm's municipal securities transactions each day. Each trade will be reviewed by computer pursuant to parameters established by the Compliance Department. These parameters include the size of the order (in terms of dollars as well as a percentage of the customer's net worth), the customer's income, investment objectives and age. These parameters can be changed and fine-tuned as the situation dictates. Currently, the exception report will contain all purchases in excess of $25,000 or 10 percent of the customer's stated net worth and all sales in excess of $10,000. A review of the exception report would be conducted by a municipal securities principal. Oversight of the review process, and any required follow-up, would be conducted.

Rule G-27, on supervision, requires a dealer to supervise the municipal securities activities of its associated persons and the conduct of its business. In particular, rule G-27(c)(ii)(B)^[*] requires that a [designated] principal promptly review and approve, in writing, each transaction in municipal securities. The Board believes that the requirement for written approval of each transaction by a [designated] principal is reasonable and necessary to promote proper supervision of the activities of municipal securities representatives. Among other purposes, these procedures enable [designated] principals to keep abreast of the firm's daily trading activity, to assess the appropriateness of mark-ups and mark-downs, and to assure that provisions for the prompt delivery of securities are being met. The exception reporting you propose would not comply with rule G-27(c)(ii)(B)^[*] because it would not result in review and approval of each municipal securities transaction by a [designated] principal.[1]  MSRB interpretation of July 26, 1989.

[1] While exception report review is not appropriate in complying with rule G-27(c)(vii)(B),^[*] we understand that certain dealers, with the approval of their enforcement agencies, use exception reports in their periodic review of customer accounts required by rule G-27(c)(iii).

^[*] [Currently codified at rule G-27(c)(vii)(B).]

NOTE: Revised to reflect subsequent amendments.

Syndicate records: sole underwriter.  This is in response to your letter regarding rule G-8 on recordkeeping. You note that rule G-8(a)(viii) requires the managing underwriter of a syndicate to maintain certain records pertaining to syndicate transactions. You ask if this rule applies to an underwriter in a sole underwriting.

Rule G-11(a)(viii) defines a syndicate as an account formed by two or more persons for the purpose of purchasing, directly or indirectly, all or any part of a new issue of municipal securities from the issuer, and making a distribution thereof. Since a sole underwriting does not involve a syndicate, rule G-8(a)(viii) does not apply to sole underwritings. Of course, the sole underwriter must maintain other required records for transactions in the new issue.  MSRB interpretation of May 12, 1989.

In 1986, several municipal securities dealers began selling ownership rights to discrete interest payments, principal payments or combinations of interest and principal payments on municipal securities. In 1987, the Board asked the Securities and Exchange Commission staff whether these "stripped coupon" instruments are municipal securities for purposes of the Securities Exchange Act and thus are subject to Board rules. On January 19, 1989, the staff of the Division of Market Regulation of the Commission issued a letter stating that, subject to certain conditions, these instruments are municipal securities for purposes of Board rules (SEC staff letter).

The Board is providing the following guidance on the application of its rules to transactions in stripped coupon instruments defined as municipal securities in the SEC staff letter (stripped coupon municipal securities). Questions whether other stripped coupon instruments are municipal securities and questions concerning the SEC staff letter should be directed to the Commission staff.

Background

A dealer sponsoring a stripped coupon municipal securities program typically deposits municipal securities (the underlying securities) with a barred custodian. Pursuant to a custody agreement, the custodian separately records the ownership of the various interest payments, principal payments, or specified combinations of interest and principal payments. One combination of interest and principal payments sometimes offered is the "annual payment security," which represents one principal payment, with alternate semi-annual interest payments. This results in an annual interest rate equal to one-half the original interest rate on the securities.[1] Stripped coupon municipal securities are marketed under trade names such as Municipal Tax Exempt Investment Growth Receipts (Municipal TIGRs), Municipal Receipts (MRs), and Municipal Receipts of Accrual on Exempt Securities (MUNI RAES).

Application of Board Rules

In general, the Board's rules apply to transactions in stripped coupon municipal securities in the same way as they apply to other municipal securities transactions. The Board's rules on professional qualifications and supervision, for example, apply to persons executing transactions in the securities the same as any other municipal security. The Board's rules on recordkeeping, quotations, advertising and arbitration also apply to transactions in the securities. Dealers should be aware that rule G-19, on suitability of recommendations, and rule G-30, on fair pricing, apply to transactions in such instruments.

The Board emphasizes that its rule on fair dealing, rule G-17, requires dealers to disclose to customers purchasing stripped coupon municipal securities all material facts about the securities at or before the time of trade. Any facts concerning the underlying securities which materially affect the stripped coupon instruments, of course, must be disclosed to the customer. The Board understands that some stripped coupon municipal securities are sold without any credit enhancement to the underlying municipal securities. As pointed out in the SEC staff letter, dealers must be particularly careful in these cases to disclose all material facts relevant to the creditworthiness of the underlying issue.

Confirmation Requirements

Dealers generally should confirm transactions in stripped coupon municipal securities as they would transactions in other municipal securities that do not pay periodic interest or which pay interest annually.[2] A review of the Board's confirmation requirements applicable to the securities follows.

Securities Descriptions. Rules G-12(c)(v)(E) and G-15(a)(i)(E)[*] require a complete securities description to be included on inter-dealer and customer confirmations, respectively, including the name of the issuer, interest rate and maturity date.[3] In addition to the name of the issuer of the underlying municipal securities, the trade name and series designation assigned to the stripped coupon municipal security by the dealer sponsoring the program must be included on the confirmation.[4] Of course, the interest rate actually paid by the stripped coupon security (e.g., zero percent or the actual, annual interest rate) must be stated on the confirmation rather than the interest rate on the underlying security.[†] Similarly, the maturity date listed on the confirmation must be the date of the final payment made by the stripped coupon municipal security rather than the maturity date of the underlying securities.[5]

Credit Enhancement Information. Rules G-12(c)(vi)(D) and G-15(a)(ii)(D)[‡] require confirmations of securities pre-refunded to a call date or escrowed to maturity to state this fact along with the date of maturity set by the advance refunding and the redemption price. If the underlying municipal securities are advance-refunded, confirmations of the stripped coupon municipal securities must note this. In addition, rules G-12(c)(v)(E) and G-15(c)(i)(E)[#] require that the name of any company or other person, in addition to the issuer, obligated directly or indirectly with respect to debt service on the underlying issue or the stripped coupon security be included on confirmations.[6]

Quantity of Securities and Denominations. For securities that mature in more than two years and pay investment return only at maturity, rules G-12(c)(v) and G-15(a)(v)[**] require the maturity value to be stated on confirmations in lieu of par value. This requirement is applicable to transactions in stripped coupon municipal securities over two years in maturity that pay investment return only at maturity, e.g., securities representing one interest payment or one principal payment. For securities that pay only principal and that are pre-refunded at a premium price, the principal amount may be stated as the transaction amount, but the maturity value must be clearly noted elsewhere on the confirmation. This will permit such securities to be sold in standard denominations and will facilitate the clearance and settlement of the securities.

Rules G-12(c)(vi)(F) and G-15(a)(iii)(G)[††] require confirmations of securities that are sold or that will be delivered in denominations other than the standard denominations specified in rules G-12(e)(v) and G-15(a)(iii)(G)[††] to state the denominations on the confirmation. The standard denominations are $1,000 or $5,000 for bearer securities, and for registered securities, increments of $1,000 up to a maximum of $100,000. If stripped coupon municipal securities are sold or will be delivered in any other denominations, the denomination of the security must be stated on the confirmation.

Dated Date. Rules G-12(c)(vi)(A) and G-15(a)(iii)(A)[***] require that confirmations state the dated date of a security if it affects price or interest calculations, and the first interest payment date if other than semi-annual. The dated date for purposes of an interest-paying stripped coupon municipal security is the date that interest begins accruing to the custodian for payment to the beneficial owner. This date, along with the first date that interest will be paid to the owner, must be stated on the confirmation whenever it is necessary for calculation of price or accrued interest.

Original Issue Discount Disclosure. Rules G-12(c)(vi)(G) and G-15(a)(iii)(H)[†††] require that confirmations identify securities that pay periodic interest and that are sold by an underwriter or designated by the issuer as "original issue discount." This alerts purchasers that the periodic interest received on the securities is not the only source of tax-exempt return on investment. Under federal tax law, the purchaser of stripped coupon municipal securities is assumed to have purchased the securities at an "original issue discount," which determines the amount of investment income that will be tax-exempt to the purchaser. Thus, dealers should include the designation of "original issue discount" on confirmations of stripped coupon municipal securities, such as annual payment securities, which pay periodic interest.

Clearance and Settlement of Stripped Coupon Municipal Securities

Under rules G-12(e)(vi)(B) and G-15(a)(iv)(B), delivery of securities transferable only on the books of a custodian can be made only by the bookkeeping entry of the custodian.[7] Many dealers sponsoring stripped coupon programs provide customers with "certificates of accrual" or "receipts," which evidence the type and amount of the stripped coupon municipal securities that are held by the custodian on behalf of the beneficial owner. Some of these documents, which generally are referred to as "custodial receipts," include "assignment forms," which allow the beneficial owner to instruct the custodian to transfer the ownership of the securities on its books. Physical delivery of a custodial receipt is not a good delivery under rules G-12(e) and G-15(a) unless the parties specifically have agreed to the delivery of a custodial receipt. If such an agreement is reached, it should be noted on the confirmation of the transaction, as required by rules G-12(c)(v)(N) and G-15(a)(i)(N)[****].

The Board understands that some stripped coupon municipal securities that are assigned CUSIP numbers and sold in denominations which are multiples of $1,000 are eligible for automated comparison and automated confirmation/affirmation and that some of these instruments also are eligible for book-entry delivery through registered securities depositories. The Board reminds dealers that transactions in stripped coupon municipal securities are subject to the automated clearance requirements of rules G-12(f) and G-15(d) if they are eligible in the automated clearance systems. Dealers sponsoring stripped coupon programs also should note that rule G-34(b)(ii) requires CUSIP numbers to be assigned to stripped coupon municipal securities prior to the initial sale of the securities to facilitate clearance and settlement.

Written Disclosures in Connection with Sales of Stripped Coupon Municipal Securities

Dealers sponsoring stripped coupon municipal securities programs generally prepare "offering circulars" or "offering memoranda" describing the securities that have been placed on deposit with the custodian, the custody agreement under which the securities are held, and the tax treatment of transactions in the securities. These documents generally are provided to all customers purchasing the securities during the initial offering of the instruments. The Board strongly encourages all dealers selling stripped coupon municipal securities to provide these documents to their customers whether the securities are purchased during the initial distribution or at a later time.[8] Although the material information contained in these documents, under rule G-17, must be disclosed to customers orally if not provided in writing prior to the time of trade, the Board believes that the unusual nature of stripped coupon municipal securities and their tax treatment warrants special efforts to provide written disclosures. Moreover, if stripped coupon municipal securities are marketed during the underwriting period of the underlying issue, rule G-32 requires distribution of the official statement for the underlying issue prior to settlement of the transaction of the stripped coupon municipal securities.

[1] The Board understands that other types of stripped coupon municipal securities also may be offered with combinations of interest and principal payments providing an interest rate different than the original interest rate of the securities.

[2] Thus, for stripped coupon municipal securities that do not pay periodic interest, rules G-12(c)(v) and G-15(a)(v) require confirmations to state the interest rate as zero and, for customer confirmations, the inclusion of a legend indicating that the customer will not receive periodic interest payments. [See current rule G-15(a)(vi)(D), G-15(a)(i)(B)(4)(a) and G-15(a)(i)(D)(1).] Rules G-12(c)(vi)(H) and G-15(a)(iii)(l) [currently codified at rule G-15(a)(i)(C)(2)(e)] require confirmations of securities paying annual interest to note this fact.

[3] The complete description consists of all of the following information: the name of the issuer, interest rate, maturity date, and if the securities are limited tax, subject to redemption prior to maturity (callable), or revenue bonds, an indication to such effect, including in the case of revenue bonds the type of revenue, if necessary for a materially complete description of the securities and in the case of any securities, if necessary for a materially complete description of the securities, the name of any company or other person in addition to the issuer obligated, directly or indirectly, with respect to debt service or, if there is more than one such obligor, the statement, "multiple obligors" may be shown.

[4] Trade name and series designation is required under rules G-12(c)(vi)(l) and G-15(a)(iii)(J) [currently codified at rule G-15(a)(i)(A)(8)], which state that confirmations, must include all information necessary to ensure that the parties agree to the details of the transaction. [See also current rule G-15(a)(i)(B)(1)(a).]

[5] Therefore, the maturity date of a stripped coupon municipal security representing one interest payment is the date of the interest payment. [See current rule G-15(a)(i)(B)(3)(a).]

[6] It should be noted that the SEC staff letter is limited to instruments in which "neither the custodian nor sponsor additionally will guarantee or otherwise enhance the creditworthiness of the underlying municipal security or the stripped coupon security."

[7] Under rules G-12(c)(vi)(B) and G-15(a)(iii)(B) [currently codified at rule G-15(a)(i)(C)(2)(d)] the book-entry-only nature of the securities also must be noted on the confirmation.

[8] The Board understands that these documents generally are available from the dealers sponsoring the stripped coupon municipal securities program.

[*] [Currently codified at rule G-15(a)(i)(B)]

[†] [Currently codified at rule G-15(a)(i)(B)(4)(e)]

[‡] [Currently codified at rule G-15(a)(i)(C)(3)(c)]

[#] [Currently codified at rule G-15(a)(i)(C)(1)(b)]

[**] [Currently codified at rule G-15(a)(i)(A)(3)]

[††] [Currently codified at rule G-15(a)(i)(A)(7)(b)]

[***] [Currently codified at rule G-15(a)(i)(B)(5)]

[†††] [Currently codified at rule G-15(a)(i)(C)(4)(c)]

[****] [Currently codified at rule G-15(a)(i)(A)(7)(c)]

Use of electronic signatures.  This is in response to your letter and a number of subsequent telephone conversations regarding your dealer department's proposed use of a bond trading system. The system is an online, realtime system that integrates all front and back office functions. The system features screen input of customer account and trading information which would allow the dealer department to eliminate the paper documents currently in use. The signature of the representative introducing a customer account, required to be recorded with customer account information by rule G-8, and the signature of the principal signifying approval of each municipal securities transaction, required by rule G-27, would be performed electronically, i.e., by input in a restricted datafield. The signature of the principal approving the opening of the account, required by rule G-8, will continue to be performed manually on a printout of the customer information.[1]

Rule G-8(a)(vi) and (vii) require dealers to make and keep records for each agency and principal transaction. The records may be in the form of trading tickets or similar documents. In addition, rule G-8(a)(xi), on recordkeeping of customer account information, requires, among other things, the signature of the representative introducing the account and the principal indicating acceptance of the account to be included on the customer account record. Rule G-27(c)(ii)[*] requires, among other things, the prompt review and written approval of each transaction in municipal securities. In addition, the rule requires the regular and frequent examination of customer accounts in which municipal securities transactions are effected in order to detect and prevent irregularities and abuses. The approvals and review must be made by the designated municipal securities principal or the municipal securities sales principal. Rule G-9(e), on preservation of records, allows records to be retained electronically provided that the dealer has adequate facilities for ready retrieval and inspection of any such record and for production of easily readable facsimile copies.

The Board recognizes that efficiencies would be obtained by the replacement of paper files with electronic data bases and filing systems and generally allows records to be retained in that form.[2] Moreover, as dealers increasingly automate, there will be more interest in deleting most physical records. Electronic trading tickets and automated customer account information satisfy the recordkeeping requirements of rule G-8 as long as such information is maintained in compliance with rule G-9(e).

The Board and your enforcement agency are concerned, however, that it may be difficult to verify a representative's signature on opening the account or a principal's signature approving municipal securities transactions or periodically reviewing customer accounts if the signatures are noted only electronically. Your enforcement agency has advised us of its discussions with you. Apparently, it is satisfied that appropriate security and audit procedures can be developed to permit the use of electronic signatures of representatives and principals and ensure that such signatures are verifiable. Thus, the Board has determined that rules G-8 and G-27 permit the use of electronic signatures when security and audit procedures are agreed upon by the dealer and its appropriate enforcement agency. Whatever procedures are agreed upon must be memorialized in the dealer's written supervisory procedures required by rule G-27. MSRB Interpretation of February 27, 1989.

[1] In addition, you noted in a telephone conversation that the periodic review of customer accounts required by rule G-27(c)(ii)[*] also will be handled electronically using the principal's electronic signature to signify approval.

[2] See rule G-9(e).

[*] [Currently codified at Rule G-27(c)(i)(G)(2)]