Select regulatory documents by category:
Interpretive Guidance - Interpretive Notices
Publication date:
Comparison of Inter-Dealer Deliveries That Do Not Represent Inter-Dealer Transactions—”Step Out" Deliveries: Rules G-12(f) and G-14
Rule Number:

Rule G-14

The MSRB reminds dealers of trade reporting procedures with respect to “step outs” and other inter-dealer deliveries that are not the result of inter-dealer transactions.

Rule G-14 requires that inter-dealer purchase-sale transactions eligible for comparison through the National Securities Clearing Corporation (NSCC) automated comparison system (RTTM) be reported to the MSRB Transaction Reporting System. For these inter-dealer transactions, trade reporting to the MSRB is accomplished by both the purchasing and selling dealers submitting the trade for comparison following NSCC’s procedures, and ensuring that the trade record includes certain additional data required by Rule G-14.  NSCC then forwards each dealer’s trade submission to the MSRB. In effect, the comparison submission to NSCC doubles as the trade report to the MSRB.

In certain situations, deliveries of securities occur between two dealers even though the two dealers did not effect a purchase-sale transaction with each other. Dealers using the comparison system to facilitate these deliveries must be careful not to report the deliveries as inter-dealer transactions. A frequent example of this situation occurs when an independent investment advisor effects a transaction with a dealer (the “executing dealer”) and instructs the executing dealer to deliver securities to another dealer (the “custody dealer”) for unnamed clients of the investment advisor. The resulting delivery between the executing dealer and the custody dealer may be handled through NSCC by submitting the delivery to RTTM for comparison, even though there was no purchase-sale transaction between the two dealers. However, in these cases, the executing dealer and the custody dealer each must indicate that the submissions are for RTTM Matching Only (Destination 01, see below) to ensure that the submissions do not also constitute trade reports under Rule G-14. Failure to do so by either party will result in a violation of Rule G-14.[1]

NSCC has published procedures for identifying comparison submissions as step outs, meaning comparison submissions that do not represent reportable inter-dealer transactions.[2] Although the full procedures are not repeated here, they basically require dealers using interactive messaging to submit data to NSCC with “DEST 01” (and no other “DEST”) in the destination indicator message field and dealers using RTTM Web to select the “RTTM” trade reporting indicator.[3] To avoid violations of Rule G-14, dealers also should be careful to use NSCC’s step out procedures only when applicable (i.e., when there is an inter-dealer delivery being compared, but there was no purchase-sale transaction between the dealers).[4]

It is worth noting that comparison submissions will compare against each other in RTTM regardless of whether their step out indicators match. When two dealers submit “mismatched” destination indicators and a comparison occurs, NSCC forwards data about both submissions to the MSRB, but the MSRB is unable to determine which dealer was correct as to whether the comparison represents a transaction or a step out. However, it is clear in such a case that at least one of the dealers has violated Rule G-14, either by reporting a true inter-dealer trade as a step out or by reporting an inter-dealer transaction that did not occur.

The MSRB is developing a report that will identify such “mismatched” inter-dealer trade comparisons as an aid to dealers and enforcement personnel. The MSRB will publish a notice when the report is available. However, dealers should at this time review their comparison and trade reporting procedures to ensure that their comparison submissions correctly use the step out indicator and use it only when appropriate.

Questions about the procedure for processing step out deliveries should be directed to NSCC. Questions about whether a particular type of delivery is reportable as an inter-dealer purchase-sale transaction may be directed to MSRB staff.


[1] In this example, the executing dealer has an additional duty to report its execution of the investment advisor’s order to the MSRB as a dealer sale to a customer; the submission of the “step out” delivery to NSCC does not substitute for this customer trade report. See MSRB Notice 2003-20, “Notice on Reporting and Comparison of Certain Transactions Effected by Investment Advisors: Rules G-12(f) and G-14,” May 23, 2003.

[2] For NSCC’s complete procedure on comparing step out deliveries, see e.g., NSCC Important Notice A5943/P&S5513, “Changes to Municipal Bond ‘Step Out’ Processing,” December 2, 2004, on www.nscc.com.

[3] To further distinguish step out submissions, dealers also should include “STEP” in the Trader ID contra party field.

[4] Another example of a transfer of securities between dealers that is not the result of a purchase-sale transaction was described in MSRB Notice 2004-14, “Notice on Certain Inter-Dealer Transfers of Municipal Securities: Rules G-12(f) and G-14,” June 4, 2004.

Interpretive Guidance - Interpretive Notices
Publication date:
Reminder Regarding Modification and Cancellation of Transaction Reports: Rule G-14
Rule Number:

Rule G-14

Executive Summary

The Municipal Securities Rulemaking Board (“MSRB”) reminds brokers, dealers and municipal securities dealers (collectively “dealers”) of the need to report municipal securities transactions accurately and to minimize the submission of modifications and cancellations to the Real-Time Transaction Reporting System (“RTRS”). Each transaction initially should be reported correctly to RTRS. Thereafter, only changes necessary to achieve accurate and complete transaction reporting should be submitted to RTRS. Changes should be rare since properly reported transactions should not need to be corrected.

* * *

Under Rule G-14, dealers are required to report all transactions to the MSRB and to report accurately and completely the information specified in the Rule G-14 RTRS Procedures (“Procedures”). Trades that are reported with errors affect the accuracy of the information published in price transparency reports as well as the audit trail information retained in the surveillance database.[1]

The MSRB has published notices to dealers reminding them of their obligation to report transactions correctly and to monitor error reports the MSRB sends them.[2]  Each trade should be reported correctly in the dealer’s initial submission of trade data to RTRS and, for inter-dealer trades, to the Real-time Trade Matching (“RTTM”) system as well. Changes should be rare since properly reported transactions should not need to be corrected. If, however, a transaction is reported with incorrect or missing attributes (such as price or capacity), the Procedures require the dealer to correct the report as soon as possible.[3]  When RTRS sends certain error messages to a dealer, the dealer is required to correct the trade report.[4] Dealers can make those corrections, or other necessary corrections in reported data, by modifying the trade report or by cancelling the report and submitting a correct replacement.[5] If it is necessary to modify a report, modification is preferred over cancellation and resubmission.[6]

Dealers should not change trade reports when the transaction attribute that changes is not required to be reported by MSRB or NSCC. For example, if only the account representative associated with a transaction changes, the report to the MSRB should not be changed, as this information is not required to be reported to the MSRB under Rule G-14. Dealers should take care that, if a modification or cancellation is submitted that is not responding to an RTRS error message, the dealer is correcting or cancelling an erroneous report.[7]

RTRS counts the number of modifications and cancellations submitted by each dealer. The MSRB provides statistics to the NASD and other enforcement agencies that measure dealer performance in modifying and cancelling transactions, as well as error rates of original submissions. Dealers that excessively modify or cancel trade reports will have above-average rates in these statistical reports. Dealers therefore should change trade reports only when appropriate to attain accurate and complete reporting under Rule G-14 and the Procedures.

Dealers can monitor their reporting of transactions in compliance with Rule G-14 in several ways. The MSRB currently provides information to dealers about their reporting performance. Any error detected by RTRS is reported back to the submitter by electronic message and is shown to the submitter and the executing dealer on the RTRS Web screen.[8] RTRS also sends e-mail error messages to dealers on request. The RTRS Web screen lists all trades cancelled by the dealer, under its Advanced Search feature. In addition, beginning in March 2005, the MSRB plans to make available to dealers the same statistics provided to the enforcement agencies, in a report entitled “G-12(f)/G-14 Compliance Data from RTRS.” This will be available monthly on the first Monday after the 15th of the month. A dealer’s report will include its statistics for the most recent full month and for the previous month.[9] It will also include summary statistics for the municipal securities industry so that the dealer can compare its performance to the industry’s. Further information about how a dealer can obtain its compliance statistics will be posted in March on the MSRB web site, www.msrb.org.


[1] Transactions reported to the MSRB are made available to the NASD and other regulators for their market surveillance and enforcement activities

[2] See, e.g., “Reminder Regarding MSRB Rule G-14 Transaction Reporting Requirements” (March 3, 2003) on www.msrb.org.

[3] See Rule G-14 RTRS Procedures paragraph (a)(iv) and  “Reminder Regarding Accuracy of Information Submitted to the MSRB Transaction Reporting System: Rule G-14” (February 10, 2004) on www.msrb.org.

[4] Messages which indicate a trade report is “unsatisfactory” and which have an error code beginning with “U” require that the trade be modified or that it be cancelled and replaced. See “Specifications for Real-time Reporting of Municipal Securities Transactions,” especially the table and text after the table in section 2.9. This document is on www.msrb.org.

[5] Changes to inter-dealer trades are governed also by National Securities Clearing Corporation (“NSCC”) rules. See, e.g., “Interactive Messaging: NSCC Participant Specifications for Matching Input and Output” on www.nscc.com.

[6] Modification is preferred when changes are necessary because a modification is counted as a single change to a trade report. A cancellation and resubmission are counted as a change and (unless the resubmission is done within the original deadline for reporting the trade) also a late report of a trade. Methods for cancelling and modifying reports are described in Sections 1.3.3 and 2.9 of “Specifications for Real-time Reporting of Municipal Securities Transactions: Version 1.2” on www.msrb.org.

[7] Note that the MSRB does not require a dealer to report a change to the settlement date of a trade in  when-issued securities, if that is the only change.

[8] See “Real-Time Transaction Reporting Web User Manual” on www.msrb.org.

[9] The first report, planned for March 21, 2005, will include statistics only for February, since RTRS went into operation on January 31, 2005.

Interpretive Guidance - Interpretive Notices
Publication date:
Disclosure Of Material Facts--Disclosure Of Original Issue Discount Bonds
Rule Number:

Rule G-47

The MSRB is publishing this notice to remind dealers of their affirmative disclosure obligations when effecting transactions with customers in original issue discount bonds. An original issue discount bond, or O.I.D. bond, is a bond that was sold at the time of issue at a price that included an original issue discount. The original issue discount is the amount by which the par value of the bond exceeded its public offering price at the time of its original issuance. The original issue discount is amortized over the life of the security and, on a municipal security, is generally treated as tax-exempt interest. When the investor sells the security before maturity, any profit realized on such sale is calculated (for tax purposes) on the adjusted book value, which is calculated for each year the security is outstanding by adding the accretion value to the original offering price. The amount of the accretion value (and the existence and total amount of original issue discount) is determined in accordance with the provisions of the Internal Revenue Code and the rules and regulations of the Internal Revenue Service.[1]

Rule G-17, the MSRB’s fair dealing rule, encompasses two general principles. First, the rule imposes a duty on dealers not to engage in deceptive, dishonest, or unfair practices. This first prong of Rule G-17 is essentially an antifraud prohibition. In addition to the basic antifraud provisions in the rule, the rule imposes a duty to deal fairly with all persons. As part of a dealer’s obligation to deal fairly, the MSRB has interpreted the rule to create affirmative disclosure obligations for dealers. The MSRB has stated that the dealer’s affirmative disclosure obligations require that a dealer disclose, at or before the sale of municipal securities to a customer, all material facts concerning the transaction, including a complete description of the security.[2] These obligations apply even when a dealer is effecting non-recommended secondary market transactions.

In the context of the sale to customers of an original issue discount security, the MSRB’s customer confirmation rule, Rule G-15(a), provides that information regarding the status of bonds as original issue discount securities must be included on customer confirmations. Specifically, Rule G-15(a)(i)(C)(4)(c) provides that, “If the securities pay periodic interest and are sold by the underwriter as original issue discount securities, a designation that they are “original issue discount” securities and a statement of the initial public offering price of the securities, expressed as a dollar price” must be included on the customer’s confirmation.

The MSRB previously has alerted dealers of their obligation to make original issue discount disclosures to customers and has stated that, “The Board believes that the fact that a security bears an original issue discount is material information (since it may affect the tax treatment of the security); therefore, this fact should be disclosed to a customer prior to or at the time of trade.”[3] The MSRB is publishing this notice to remind dealers of their disclosure obligations under Rule G-17 because it remains concerned that, absent adequate disclosure of a security’s original issue discount status, an investor might not be aware that all or a portion of the component of his or her investment return represented by accretion of the discount is tax-exempt, and therefore might sell the securities at an inappropriately low price (i.e., at a price not reflecting the tax-exempt portion of the discount) or pay capital gains tax on the accreted discount amount. Without appropriate disclosure, an investor also might not be aware of how his or her transaction price compares to the initial public offering price of the security. Appropriate disclosure of a security’s original issue discount feature should assist customers in computing the market discount or premium on their transaction.


[1] See Glossary of Municipal Securities Terms, Second Edition (January 2004).

 

[2] See e.g., Rule G-17 Interpretation—Educational Notice on Bonds Subject to “Detachable” Call Features, May 13, 1993, MSRB Rule Book (July 2004) at 135.

[3] Rules G-12 and G-15, Comments Requested on Draft Amendments on Original Issue Discount Securities, MSRB Reports, Vol. 4, No. 6 (May 1994) at 7.

Interpretive Guidance - Interpretive Notices
Publication date:
Executing Broker Symbols: Rule G-14

MSRB Rule G-14 on Transaction Reporting requires that every dealer obtain an executing broker symbol, if one has not already been assigned, from National Association of Securities Dealers Automated Quotations (NASDAQ).  NASDAQ will assign executing broker symbols to all dealers including bank dealers.  NASDAQ Subscriber Services can be reached at 212-231-5180, option 3.  When calling NASDAQ Subscriber Services for an executing broker symbol, dealers should state that they need the symbol for use in reporting transactions in municipal securities to the MSRB.  If dealers experience difficulties in obtaining executing broker symbols, then they can send an e-mail to subscriber@NASDAQ.com.

NOTE: This notice was revised to reflect updated information.

Interpretive Guidance - Interpretive Letters
Publication date:
Review and Approval of Customer Accounts
Rule Number:

Rule G-27

Review and approval of customer accounts.  This is in response to your letter dated July 24, 1996, requesting an interpretation of rule G-27(c)(iii) on written supervisory procedures.

Rule G-27(c)(iii) requires that each municipal securities dealer adopt, maintain and enforce written supervisory procedures ensuring the "regular and frequent" review and approval by a designated principal of customer accounts introduced or carried by the dealer in which transactions in municipal securities are effected. The rule further states that such review shall be designed to ensure that such transactions are in accordance with all applicable rules and to detect and prevent irregularities and abuses.

Because circumstances vary from dealer to dealer, the Board has not specified a time period to define "regular and frequent" for purposes of rule G-27(c)(iii).  As you can see, however, the purpose of this provision is to detect and prevent irregularities and abuses that may occur in customer accounts. The Board expects dealers to establish procedures that effectively obtain this objective and that are capable of compliance. While the Board has never specifically addressed "risk-focussed" methods for determining periodic account review, the Board has stated that, in determining when an account must be reviewed, a dealer might look to the volume and frequency of trading and the nature of the securities traded. The Board noted that account review guidelines based on these factors would be appropriate if they are articulated clearly in a dealer's written supervisory procedures.[1] MSRB interpretation of August 7, 1996.


[1] Supervision Requirements, MSRB Reports, Vol. 10, No. 2 (May 1990) at 6.

Interpretive Guidance - Interpretive Notices
Publication date:
Rule G-14 Transaction Reporting Procedures-Time of Trade Reporting
Rule Number:

Rule G-14

1. Q: When is the inter-dealer time of trade reporting requirement effective?

A: The amendment to the rule G-14 transaction reporting procedures requiring the submission of time of trade execution for inter-dealer transactions became effective on July 1, 1996.

2. Q: What is the purpose of submitting the time of trade to the Board?

A: The Board's Transaction Reporting Program has two functions - public dissemination of price and volume information about frequently traded securities and the maintenance of a surveillance database to assist regulators in inspection for compliance with, and enforcement of, Board rules and securities laws. The surveillance database includes, among other things, the price and volume of each reported transaction, the trade date, the identification of the security traded, and the parties to the trade. The addition of the time of trade execution will enable the enforcement agencies to construct audit trails of inter-dealer transactions. When customer transactions are added to the system in 1998, these transaction records also will include time of trade. Time of trade will not be made public.

3. Q: How is time of trade reported?

A: Under rule G-14, inter-dealer transaction information is reported to the Municipal Securities Rulemaking Board using the same system used for automated comparison of inter-dealer transactions, operated by National Securities Clearing Corporation. Rule G-14 requires that the transaction information be submitted in the format specified by NSCC, and within such timeframe as required by NSCC to produce a compared trade for the transaction in the initial comparison cycle on the night of trade date. A broker, dealer or municipal securities dealer may employ an agent that is a member of NSCC or a registered clearing agency for the purpose of submitting transaction information. For example, the clearing broker generally reports transactions to the MSRB through NSCC when there is an introducing/clearing broker arrangement.

Under the new amendment to rule G-14, the transaction information submitted in accordance with the rule G-14 procedures must include the time of trade execution. NSCC has provided a space designated for this purpose in the standard format used for submitting trade data into the automated comparison system.

4. Q: Which dealer in an inter-dealer transaction reports the time of trade?

A: Under NSCC's automated comparison procedures, both sides of a transaction generally are required to submit transaction information. Therefore, time of trade will be reported by each side of the transaction in most cases. For "syndicate take-down" transactions, which are reported by only the seller, the time of trade is reported only by the seller.

5. Q: If the time of trade that I submit does not agree with the time of trade that the contra party submits, will this cause the trade not to compare?

A: No. The time of trade is not a match item in the automated comparison system.

6. Q: Why do both sides to the transaction have to submit the time of trade?

A: In some cases, even though both sides of a transaction are supposed to submit transaction information, the Board receives transaction information from only one party to a transaction. This may occur, for example, when a dealer "stamps an advisory" to create a compared trade. It therefore is necessary for each side of a transaction to report the time of trade to ensure that the surveillance data base has at least one report of the time of trade.

7. Q: Does the time of trade reporting requirement apply only to secondary market transactions?

A: No. The time of trade is required for all inter-dealer transactions including those in the primary market.

8. Q: How does a dealer determine the time of trade for transactions?

A: In general, this is the same time as the "time of execution," as currently required for recordkeeping purposes under rule G-8(a)(vi) and (vii).

9. Q: What is the time of trade for syndicate allocations on new issues?

A: First it should be noted that the "initial trade date" for an issue of municipal securities cannot precede the date of award (for competitive issues) or the date that the bond purchase agreement is signed (for negotiated issues). See rule G-34(a)(ii)(C)(2) and MSRB Interpretations of April 30, 1982, MSRB Manual and October 7, 1982, MSRB Manual. Similarly, the time of trade may not precede the time of award (for competitive issues) or the time that the bond purchase agreement is signed (for negotiated issues). In the typical case involving a competitive issue in which allocations are made after the date of award, the time of trade execution is the time that the allocation is made. If allocations have been "preassigned," prior to a competitive award, or prior to the signing of a bond purchase agreement, the time of award or signing of the bond purchase agreement should be entered as the "time of trade."

Print